درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 581-600 of 2147
-
MIL-DTL-6363/9A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ... -
MIL-HDBK-1655
Abstract: This handbook establishes a classification of commonly occurring defects applicable to flareless fittings and beam seal fittings specified in military specifications MIL-F-18280, MIL-F-85421, MIL-F-85720, and DoD adopted ...Subject(s) : Critical defect , Defect , Defective , Examination , Fluid connector , Inspection , Major defect , Minor defect , Quality assurance , -
A-A-59315/45
Abstract: This commercial item description sheet (CID) covers a composite blend powder that is applied using either plasma arc or combustion gas (flame spray) techniques.
Chemical composition shall conform to the following ... -
A-A-59315/19
Abstract: This commercial item description sheet (CID) covers a copper-nickel powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-L-81174/4A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
Complete requirements for procuring the light described herein shall consist of this document and the issue in effect ... -
MIL-C-85003B
Abstract: This specification establishes the design, performance, and acceptance requirements for the Chaff Cartridge (Type RR-( )/AL). The chaff (radar reflector) cartridge contains components capable of creating confusing returns ... -
MIL-STD-291C
Abstract: This standard defines the Standard TACAN Signal. The characteristics and tolerances specified will ensure compatibility of all airborne and ground equipment. Intended Use: The TACAN signal characteristics ...Subject(s) : Harmonic , Pulse , Radio , Signal , Spectrum , Wave , -
MIL-P-58102
Abstract: This specification covers heat sealable, heavy duty, watervaporproof, waterproof flexible plastic sheet and laminates for use in environmental protective systems.
Plastic sheet and laminates covered by this specification ... -
MIL-C-29600/24
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the contacts described herein shall consist of this specification and the ... -
MIL-C-22520/31
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the crimping tool described herein shall consist of this document and the ... -
MIL-B-913/2
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-V-81940/1B
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the valve described herein shall consist of this specification sheet and the issue ... -
MIL-P-6131C
Abstract: This specification establishes requirements for humidity indicating, dehydrator plugs that are intended to protect aircraft engine cylinders and other similar equipment against corrosion due to moisture and to indicate ... -
MIL-R-85323
Abstract: This specification establishes the requirements for the manufacture and inspection of two types of bomb ejector racks. The Type I bomb rack is capable of carrying and releasing up to three stores with a total combined ...