درباره ما
NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 561-580 of 2147
-
MIL-C-23024A
Abstract: This document governs the manufacture, assembly and preparation for delivery of the MARK 36 MOD 0 delay cartridge and the methods of inspection and tests upon which product acceptance will be based. Intended ... -
MIL-DTL-22442/26E
Abstract: This specification sheet is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies Of the Department Of Defense.
The requirements for acquiring ... -
MIL-B-81793/33
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-P-29609
Abstract: This specification covers basic characteristics required for porous polyimide materials intended for use as instrument and thin section ball bearing retainers (cages), and methods of determining these characteristics. ...Subject(s) : Bearings , Cage , Separators , -
MIL-L-81561/4
Abstract: This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-DTL-25427/4
Abstract: Intended Use: These coupling caps are intended for use in military aircraft or hydraulic ground support equipment where the bulkhead mounting half and protective cap are part of the aircraft and the hose ... -
MIL-L-22624A
Abstract: This specification covers the 20MM Ammunition Link Mark 6 Mods 4, 5, and 6, referred to herein as the Link. Intended Use: The links covered by this specification are intended for linking into 20MM ammunition ... -
MIL-I-81969/29
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the tools described herein shall consist of this document and the latest ... -
W-L-101/13B
Abstract: This specification sheet was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
(This specification sheet forms a part of the latest issue of ... -
MS14187
Abstract: THE TIRE COVERED BY THIS DRAWING SHALL BE SUITABLE FOR USE AND PROVIDE REASONABLE SERVICE LIFE DURING ALL NORMAL OPERATIONS AT TAKEOFF AND LANDING SPEEDS INDICATED HEREIN ON ALL TYPES OF RUNWAYS AND ON AIRCRAFT CARRIERS. -
MIL-B-81793/5
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-L-85532
Abstract: The specification covers an air launched weapons loader developed as part of the U.S. Marine Corps Expeditionary Airfield Program. The loader will be designated as Model A/S32K-1D and referred to as the second generation ... -
MIL-STD-2161B
Abstract: General. This military standard establishes the requirements for paint schemes and markings to be applied to the exterior surfaces of U.S. Navy and Marine Corps aircraft, including those procured for other government ...Subject(s) : Aircraft color patterns , Emergency warnings , Hazard warnings , Identification , Insignias , -
MIL-T-85512
Abstract: This specification establishes the requirements for the manufacture and acceptance of the Tow Bar and Bridle Assembly which is used with the TDU-32 series aerial banner target. Intended Use: The tow bar and ... -
MIL-B-81006B
Abstract: This specification establishes sampling plans and procedures for use in the demonstration of compliance with dispersion requirements for free-fall bombs. Intended Use: The sampling plans and procedures ... -
MIL-C-81585
Abstract: This specification covers Mk 12, Mk 13, Mk 14, Mk 15, Mk 16 and Mk 18 Weapon Cradles, for shipping and storage of completely assembled weapons (less the removable aerodynamic control surfaces). The cradles are designed in ... -
MIL-B-81205
Abstract: This specification covers the requirements for the procurement of one type of Handling Band for attachment to the AQM-37A Target to facilitate handling, and for shipment within a container. Intended Use: ...