درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 561-580 of 2792
-
MIL-T-24649/5
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the ... -
MIL-STD-2042-6B
Abstract: This standard practice provides detailed methods for testing optical fiber cable installations.
These criteria apply to installations on specific ships when invoked by the governing ship specification or other ...Subject(s) : Acceptance tests , Assembly link loss test , Attenuation test , Continuity test , End-to-end attenuation test , Installation tests , Measurement quality jumpers , Post-installation tests , Pre-installation tests , Safety procedures , Visual inspections , -
MIL-I-3190/7A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the insulation sleeving described herein shall consist of this specification sheet ... -
MIL-M-15842B
Abstract: This specification covers dry air-setting refractory mortar for use in laying and bonding refractory brick in ship boiler furnaces; and wet air-setting refractory mortar for use in laying refractory brick in Naval stationary ... -
MIL-T-24398
Abstract: This specification covers auxiliary steam turbine and reduction gear (where used) for generator sets for Naval ships and submarines and includes couplings, and additional equipment, fittings and accessories. Propulsion ... -
MIL-E-15465H
Abstract: This specification covers air ejector assemblies to serve surface condensers for Naval shipboard application.
Air ejector assemblies shall be of the following types and classes, as specified (see 6.2 and ...Subject(s) : Condensers , Heat exchangers , Jet pumps , Steam condensers , Vacuum distillation , -
MS16566 REV C
Abstract: This standard has been approved by the BUREAU OF SHIPS, Department of the NAVY and is mandatory for use by that activity. All other military activities are required to employ this standard where suitable. -
MIL-PRF-2765E
Abstract: This specification covers an oil-resistant type of synthetic rubber material for gaskets. Intended Use: The synthetic rubber material covered by this specification is intended for use as gaskets where resistance ...Subject(s) : Extruded material , Molded shapes , Sheet and strip material , Sheet rubber , Synthetic rubber ,