MIL-STD-2042-6B

NAVY - SH - Naval Sea Systems Command (Ship Systems)

FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS (TESTS) (PART 6 OF 7 PARTS)

Organization:

NAVY - SH - Naval Sea Systems Command (Ship Systems)

Year: 2002

Abstract: This standard practice provides detailed methods for testing optical fiber cable installations.
These criteria apply to installations on specific ships when invoked by the governing ship specification or other contractual document. They are intended primarily for new construction; however, they are also applicable for conversion or alteration of existing ships. Where there is a conflict between this document and the ship specification or contract, the ship specification or contract shall take precedence. Where ship design is such that the methods herein cannot be implemented, users shall submit new methods or modifications to existing methods for approval prior to implementation to: Department of the Navy, Naval Surface Warfare Center, Dahlgren Division, ATTN: Code B35, 17320 Dahlgren Road, Dahlgren, VA 22448-5100. Intended Use: The methods for testing depicted in this standard practice are intended to ensure the FOCT is properly installed during and after each phase of installation procedures.

URI: http://mapnamagz.yabesh.ir/std;query=autho1826AF67FCdardstandardsfen/handle/yse/183653

Subject: Acceptance tests

Collections :

NAVY - SH - Naval Sea Systems Command (Ship Systems)

Show full item record

contributor author	NAVY - SH - Naval Sea Systems Command (Ship Systems)
date accessioned	2017-09-04T18:00:36Z
date available	2017-09-04T18:00:36Z
date copyright	07/25/2002
date issued	2002
identifier other	FXEFABAAAAAAAAAA.pdf
identifier uri	http://mapnamagz.yabesh.ir/std;query=autho1826AF67FCdardstandardsfen/handle/yse/183653
description abstract	This standard practice provides detailed methods for testing optical fiber cable installations. These criteria apply to installations on specific ships when invoked by the governing ship specification or other contractual document. They are intended primarily for new construction; however, they are also applicable for conversion or alteration of existing ships. Where there is a conflict between this document and the ship specification or contract, the ship specification or contract shall take precedence. Where ship design is such that the methods herein cannot be implemented, users shall submit new methods or modifications to existing methods for approval prior to implementation to: Department of the Navy, Naval Surface Warfare Center, Dahlgren Division, ATTN: Code B35, 17320 Dahlgren Road, Dahlgren, VA 22448-5100. Intended Use: The methods for testing depicted in this standard practice are intended to ensure the FOCT is properly installed during and after each phase of installation procedures.
language	English
title	MIL-STD-2042-6B	num
title	FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR NAVAL SHIPS (TESTS) (PART 6 OF 7 PARTS)	en
type	standard
page	74
status	Active
tree	NAVY - SH - Naval Sea Systems Command (Ship Systems):;2002
contenttype	fulltext
subject keywords	Acceptance tests
subject keywords	Assembly link loss test
subject keywords	Attenuation test
subject keywords	Continuity test
subject keywords	End-to-end attenuation test
subject keywords	Installation tests
subject keywords	Measurement quality jumpers
subject keywords	Post-installation tests
subject keywords	Pre-installation tests
subject keywords	Safety procedures
subject keywords	Visual inspections