درباره ما
CSA Z741-12
Geological storage of carbon dioxide - First Edition
Organization:
CSA - CSA Group
Year: 2012
Abstract: This Standard
(a) establishes requirements and recommendations for the geological storage of carbon dioxide. The purpose of these requirements is to promote environmentally safe and long-term containment of carbon dioxide in a way that minimizes risks to the environment and human health.
(b) is primarily applicable to saline aquifers and depleted hydrocarbon reservoirs and does not preclude its application to storage associated with hydrocarbon recovery.
(c) includes, but is not limited to, the safe design, construction, operation, maintenance, and closure of storage sites.
(d) provides recommendations for the development of management documents, community engagement, risk assessment, and risk communication.
Notes:
(1) This Standard recognizes that site selection and management are unique for each project and that intrinsic engineering risk(s) and uncertainties will be dealt with on a site-specific basis.
(2) With reference to not precluding storage associated with hydrocarbon recovery, it is explicit that this Standard does not establish requirements or recommendations associated with enhanced hydrocarbon recovery using CO2. While not specifically intended to cover storage associated with enhanced hydrocarbon recovery operations, aspects of this Standard could be used for projects considering the long term storage of CO2 that occurs as an incident of routine enhanced recovery operations.
This Standard applies to the storage of carbon dioxide (CO2) streams in geological media as defined in Clause 1.1.
Note: Depending on the storage unit, the stream could include impurities for which health, environmental, and safety risks require proper evaluation. This Standard does not allow waste and other matter to be added for the purpose of disposing of the added waste or other matter. However, a CO2 stream can contain incidental associated substances from the source, capture, or injection process and/or trace substances added to assist in CO2 migration detection.
The project life cycle covers all aspects, periods, and stages of the storage project, beginning with those necessary to initiate the project (including site screening, selection, characterization, assessment, engineering, permitting, and construction), that lead to the start of injection and proceeding through subsequent operations until cessation of injection; and culminating in the post-injection period, which can include a closure period and a post-closure period. This Standard does not specify post-closure period requirements. Figure 1 illustrates the confines, limits, and boundaries of this Standard.
Note: This Standard specifies that the post-closure period occurs only if a transfer of responsibility to a designated authority or other responsible entity takes place. If a transfer does not occur, the project remains in the closure period and formal site closure does not occur.
(a) establishes requirements and recommendations for the geological storage of carbon dioxide. The purpose of these requirements is to promote environmentally safe and long-term containment of carbon dioxide in a way that minimizes risks to the environment and human health.
(b) is primarily applicable to saline aquifers and depleted hydrocarbon reservoirs and does not preclude its application to storage associated with hydrocarbon recovery.
(c) includes, but is not limited to, the safe design, construction, operation, maintenance, and closure of storage sites.
(d) provides recommendations for the development of management documents, community engagement, risk assessment, and risk communication.
Notes:
(1) This Standard recognizes that site selection and management are unique for each project and that intrinsic engineering risk(s) and uncertainties will be dealt with on a site-specific basis.
(2) With reference to not precluding storage associated with hydrocarbon recovery, it is explicit that this Standard does not establish requirements or recommendations associated with enhanced hydrocarbon recovery using CO2. While not specifically intended to cover storage associated with enhanced hydrocarbon recovery operations, aspects of this Standard could be used for projects considering the long term storage of CO2 that occurs as an incident of routine enhanced recovery operations.
This Standard applies to the storage of carbon dioxide (CO2) streams in geological media as defined in Clause 1.1.
Note: Depending on the storage unit, the stream could include impurities for which health, environmental, and safety risks require proper evaluation. This Standard does not allow waste and other matter to be added for the purpose of disposing of the added waste or other matter. However, a CO2 stream can contain incidental associated substances from the source, capture, or injection process and/or trace substances added to assist in CO2 migration detection.
The project life cycle covers all aspects, periods, and stages of the storage project, beginning with those necessary to initiate the project (including site screening, selection, characterization, assessment, engineering, permitting, and construction), that lead to the start of injection and proceeding through subsequent operations until cessation of injection; and culminating in the post-injection period, which can include a closure period and a post-closure period. This Standard does not specify post-closure period requirements. Figure 1 illustrates the confines, limits, and boundaries of this Standard.
Note: This Standard specifies that the post-closure period occurs only if a transfer of responsibility to a designated authority or other responsible entity takes place. If a transfer does not occur, the project remains in the closure period and formal site closure does not occur.
Collections
:
Show full item record
| contributor author | CSA - CSA Group | |
| date accessioned | 2017-09-04T18:23:16Z | |
| date available | 2017-09-04T18:23:16Z | |
| date copyright | 2012.10.01 | |
| date issued | 2012 | |
| identifier other | IDSPBFAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/205717 | |
| description abstract | This Standard (a) establishes requirements and recommendations for the geological storage of carbon dioxide. The purpose of these requirements is to promote environmentally safe and long-term containment of carbon dioxide in a way that minimizes risks to the environment and human health. (b) is primarily applicable to saline aquifers and depleted hydrocarbon reservoirs and does not preclude its application to storage associated with hydrocarbon recovery. (c) includes, but is not limited to, the safe design, construction, operation, maintenance, and closure of storage sites. (d) provides recommendations for the development of management documents, community engagement, risk assessment, and risk communication. Notes: (1) This Standard recognizes that site selection and management are unique for each project and that intrinsic engineering risk(s) and uncertainties will be dealt with on a site-specific basis. (2) With reference to not precluding storage associated with hydrocarbon recovery, it is explicit that this Standard does not establish requirements or recommendations associated with enhanced hydrocarbon recovery using CO2. While not specifically intended to cover storage associated with enhanced hydrocarbon recovery operations, aspects of this Standard could be used for projects considering the long term storage of CO2 that occurs as an incident of routine enhanced recovery operations. This Standard applies to the storage of carbon dioxide (CO2) streams in geological media as defined in Clause 1.1. Note: Depending on the storage unit, the stream could include impurities for which health, environmental, and safety risks require proper evaluation. This Standard does not allow waste and other matter to be added for the purpose of disposing of the added waste or other matter. However, a CO2 stream can contain incidental associated substances from the source, capture, or injection process and/or trace substances added to assist in CO2 migration detection. The project life cycle covers all aspects, periods, and stages of the storage project, beginning with those necessary to initiate the project (including site screening, selection, characterization, assessment, engineering, permitting, and construction), that lead to the start of injection and proceeding through subsequent operations until cessation of injection; and culminating in the post-injection period, which can include a closure period and a post-closure period. This Standard does not specify post-closure period requirements. Figure 1 illustrates the confines, limits, and boundaries of this Standard. Note: This Standard specifies that the post-closure period occurs only if a transfer of responsibility to a designated authority or other responsible entity takes place. If a transfer does not occur, the project remains in the closure period and formal site closure does not occur. | |
| language | English | |
| title | CSA Z741-12 | num |
| title | Geological storage of carbon dioxide - First Edition | en |
| type | standard | |
| page | 80 | |
| status | Active | |
| tree | CSA - CSA Group:;2012 | |
| contenttype | fulltext |