درباره ما
CSA C900.3-06
Heat meters - Part 3: Data exchange and interfaces - First Edition
Organization:
CSA - CSA Group
Year: 2011
Abstract: This European standard applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed or given up by a liquid called the energy-conveying liquid. The meter indicates heat in legal units.
Electrical safety requirements are not covered by this standard.
Part 3 specifies the data exchange between a meter and a read-out device (POINT / POINT communication). For these applications using the optical readout head and the CL interface, the EN 61 107 protocol is recommended.
Further stipulations are set out for the data communication between several meters and one master unit in a local network (MULTI-POINT communication). This can be done with a few meters with a hand held master unit by using the inductive interface on the Meter-Bus (in the following called the M-Bus).
For bigger networks with up to 250 meters, a master unit with AC mains supply is necessary to control the M-Bus. For these applications a protocol according to EN 60870-5 is recommended.
Electrical safety requirements are not covered by this standard.
Part 3 specifies the data exchange between a meter and a read-out device (POINT / POINT communication). For these applications using the optical readout head and the CL interface, the EN 61 107 protocol is recommended.
Further stipulations are set out for the data communication between several meters and one master unit in a local network (MULTI-POINT communication). This can be done with a few meters with a hand held master unit by using the inductive interface on the Meter-Bus (in the following called the M-Bus).
For bigger networks with up to 250 meters, a master unit with AC mains supply is necessary to control the M-Bus. For these applications a protocol according to EN 60870-5 is recommended.
Collections
:
Show full item record
| contributor author | CSA - CSA Group | |
| date accessioned | 2017-09-04T18:15:12Z | |
| date available | 2017-09-04T18:15:12Z | |
| date copyright | 2006.09.01 (R 2011) | |
| date issued | 2011 | |
| identifier other | AEYCDFAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/198073 | |
| description abstract | This European standard applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed or given up by a liquid called the energy-conveying liquid. The meter indicates heat in legal units. Electrical safety requirements are not covered by this standard. Part 3 specifies the data exchange between a meter and a read-out device (POINT / POINT communication). For these applications using the optical readout head and the CL interface, the EN 61 107 protocol is recommended. Further stipulations are set out for the data communication between several meters and one master unit in a local network (MULTI-POINT communication). This can be done with a few meters with a hand held master unit by using the inductive interface on the Meter-Bus (in the following called the M-Bus). For bigger networks with up to 250 meters, a master unit with AC mains supply is necessary to control the M-Bus. For these applications a protocol according to EN 60870-5 is recommended. | |
| language | English | |
| title | CSA C900.3-06 | num |
| title | Heat meters - Part 3: Data exchange and interfaces - First Edition | en |
| type | standard | |
| page | 62 | |
| status | Active | |
| tree | CSA - CSA Group:;2011 | |
| contenttype | fulltext |