MIL-D-8708C

NAVY - AS - Naval Air Systems Command

DEMONSTRATION: AIRCRAFT WEAPON SYSTEMS, GENERAL SPECIFICATION FOR

Organization:

Year: 1991

Abstract: This specification establishes the general requirements for demonstration of Naval aircraft weapon systems during full scale engineering development. The general requirements may be modified and amplified by an addendum to this specification for specific weapons systems. "Demonstration" refers to all contractor tests and evaluations conducted during full scale development including efforts associated with performing and reporting on the tests required by this specification.
This specification defines the tests required for contractor demonstration of Naval aircraft prior to the final phase of DT-II (TECHEVAL).
The requirements of this specification apply to all new aircraft weapon systems or to major modification or significant alteration to an existing system.
Addenda shall agree with this specification in paragraph arrangement, numbering, and headings, except where a paragraph is listed in the addendum as "not applicable" or "not required," subsequent subparagraphs will be omitted. If the numbering sequence is not affected, subparagraphs may be added as required. In cases of discrepancies between this specification and the addenda, the addenda shall govern.
The approval of analyses, test plans, procedures, or test reports which incorporate variations from the stated requirements does not constitute approval of a deviation. Deviations from the requirements of this specification, its addenda, or the detail specification may be granted only by the contracting activity in writing. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD) Code 53, Lakehurst, NJ 08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: This specification specifies the tests which shall be performed for Naval aircraft prior to the TECHEVAL performed by the Navy and certification of readiness for Operational Evaluation (OPEVAL).

URI: http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/144685

Subject: Detailed program plan

Collections :

NAVY - AS - Naval Air Systems Command

Show full item record

contributor author	NAVY - AS - Naval Air Systems Command
date accessioned	2017-09-04T17:21:27Z
date available	2017-09-04T17:21:27Z
date copyright	08/12/1991
date issued	1991
identifier other	ZTFWDAAAAAAAAAAA.pdf
identifier uri	http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/144685
description abstract	This specification establishes the general requirements for demonstration of Naval aircraft weapon systems during full scale engineering development. The general requirements may be modified and amplified by an addendum to this specification for specific weapons systems. "Demonstration" refers to all contractor tests and evaluations conducted during full scale development including efforts associated with performing and reporting on the tests required by this specification. This specification defines the tests required for contractor demonstration of Naval aircraft prior to the final phase of DT-II (TECHEVAL). The requirements of this specification apply to all new aircraft weapon systems or to major modification or significant alteration to an existing system. Addenda shall agree with this specification in paragraph arrangement, numbering, and headings, except where a paragraph is listed in the addendum as "not applicable" or "not required," subsequent subparagraphs will be omitted. If the numbering sequence is not affected, subparagraphs may be added as required. In cases of discrepancies between this specification and the addenda, the addenda shall govern. The approval of analyses, test plans, procedures, or test reports which incorporate variations from the stated requirements does not constitute approval of a deviation. Deviations from the requirements of this specification, its addenda, or the detail specification may be granted only by the contracting activity in writing. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD) Code 53, Lakehurst, NJ 08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: This specification specifies the tests which shall be performed for Naval aircraft prior to the TECHEVAL performed by the Navy and certification of readiness for Operational Evaluation (OPEVAL).
language	English
title	MIL-D-8708C	num
title	DEMONSTRATION: AIRCRAFT WEAPON SYSTEMS, GENERAL SPECIFICATION FOR	en
type	standard
page	283
status	Active
tree	NAVY - AS - Naval Air Systems Command:;1991
contenttype	fulltext
subject keywords	Detailed program plan
subject keywords	Full scale engineering development
subject keywords	High angle of attack