MIL-R-85895

NAVY - AS - Naval Air Systems Command

RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A

Organization:

Year: 1988

Abstract: This specification establishes the requirements for the manufacture, testing, and acceptance of the BRU-32A bomb rack capable of carrying, releasing, and ejecting stores having suspension lugs spaced 14 inches and 30 inches apart. The BRU-32A bomb rack shall be utilized for carrying and forced ejection release of stores weighing from 500 pounds to 2,600 pounds. The test units in this specification define minimum acceptable requirements. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding officer, Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD) Code 93, Lakehurst, NJ 08733-5100, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The bomb rack covered by this specification is a single carriage ejector bomb rack for carriage of 14-inch and 30-inch suspension stores, multiple carriage bomb racks, and external fuel tanks. The bomb rack is mounted externally in an aircraft wing pylon or fuselage and will accommodate stores ranging in diameter from 10 inches to 28 inches and weighing up to 2,600 pounds. The bomb rack is intended to be used on the F/A-18/TF-18 aircraft.

URI: http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/142789

Subject: Bomb Rack

Collections :

NAVY - AS - Naval Air Systems Command

Show full item record

contributor author	NAVY - AS - Naval Air Systems Command
date accessioned	2017-09-04T17:19:34Z
date available	2017-09-04T17:19:34Z
date copyright	03/28/1988
date issued	1988
identifier other	ZNRPDAAAAAAAAAAA.pdf
identifier uri	http://mapnamagz.yabesh.ir/std;query=authoF23793FDFCDCAC4/handle/yse/142789
description abstract	This specification establishes the requirements for the manufacture, testing, and acceptance of the BRU-32A bomb rack capable of carrying, releasing, and ejecting stores having suspension lugs spaced 14 inches and 30 inches apart. The BRU-32A bomb rack shall be utilized for carrying and forced ejection release of stores weighing from 500 pounds to 2,600 pounds. The test units in this specification define minimum acceptable requirements. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding officer, Naval Air Engineering Center, Systems Engineering and Standardization Department (SESD) Code 93, Lakehurst, NJ 08733-5100, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Intended Use: The bomb rack covered by this specification is a single carriage ejector bomb rack for carriage of 14-inch and 30-inch suspension stores, multiple carriage bomb racks, and external fuel tanks. The bomb rack is mounted externally in an aircraft wing pylon or fuselage and will accommodate stores ranging in diameter from 10 inches to 28 inches and weighing up to 2,600 pounds. The bomb rack is intended to be used on the F/A-18/TF-18 aircraft.
language	English
title	MIL-R-85895	num
title	RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A	en
type	standard
page	19
status	Active
tree	NAVY - AS - Naval Air Systems Command:;1988
contenttype	fulltext
subject keywords	Bomb Rack
subject keywords	multiple carriage
subject keywords	Bomb Rack
subject keywords	single carriage
subject keywords	14 and 30 inch suspension stores
subject keywords	Fuel Tanks
subject keywords	multiple carriage
subject keywords	Rack
subject keywords	Bomb Ejector
subject keywords	Aircraft
subject keywords	BRU-32A
subject keywords	Stores
subject keywords	500 to 2,600 pounds