درباره ما
API RP 19B
Recommended Practices for Evaluation of Well Perforators - SECOND EDITION
Organization:
API - American Petroleum Institute
Year: 2006
Abstract: GENERAL
This Recommended Practice describes standard procedures for evaluating the performance of perforating equipment so that representations of this performance may be made to the industry under a standard practice. This document supersedes all previously issued editions of API RP 43.
Sections 1 – 4 of this Recommended Practice provides means for evaluating perforating systems (multiple shot) in 4 ways:
1. Performance under ambient temperature and atmospheric pressure test conditions.
2. Performance in stressed Berea sandstone targets (simulated wellbore pressure test conditions).
3. How performance may be changed after exposure to elevated temperature conditions.
4. Flow performance of a perforation under specific stressed test conditions.
Section 5 of this Recommended Practice provides a procedure to quantify the amount of debris that comes out of a perforating gun during detonation. The purpose of this Recommended Practice is to specify the materials and methods used to evaluate objectively the performance of perforating systems or perforators.
IMPLEMENTATION
These procedures become effective as of the date of publication.
API REGISTERED PERFORATOR SYSTEMS
Information on API Registration of perforator systems can be found in Appendix D.
REPORTS AND ADVERTISEMENTS
Reports, articles, papers, periodicals, advertisements, or similar publications which refer to results from tests conducted according to API RP 19B must not be worded in a fashion to denote that the American Petroleum Institute either endorses the result cited or recommends or disapproves the use of the perforating system described.
Use of data obtained under API RP 19B tests in reports, articles, papers, periodicals, advertisements, or other published material shall include, as a minimum, all test configuration data not specified by API RP 19B or left to the verifying company’s choosing by API RP 19B and the average measured results of the test.
This Recommended Practice describes standard procedures for evaluating the performance of perforating equipment so that representations of this performance may be made to the industry under a standard practice. This document supersedes all previously issued editions of API RP 43.
Sections 1 – 4 of this Recommended Practice provides means for evaluating perforating systems (multiple shot) in 4 ways:
1. Performance under ambient temperature and atmospheric pressure test conditions.
2. Performance in stressed Berea sandstone targets (simulated wellbore pressure test conditions).
3. How performance may be changed after exposure to elevated temperature conditions.
4. Flow performance of a perforation under specific stressed test conditions.
Section 5 of this Recommended Practice provides a procedure to quantify the amount of debris that comes out of a perforating gun during detonation. The purpose of this Recommended Practice is to specify the materials and methods used to evaluate objectively the performance of perforating systems or perforators.
IMPLEMENTATION
These procedures become effective as of the date of publication.
API REGISTERED PERFORATOR SYSTEMS
Information on API Registration of perforator systems can be found in Appendix D.
REPORTS AND ADVERTISEMENTS
Reports, articles, papers, periodicals, advertisements, or similar publications which refer to results from tests conducted according to API RP 19B must not be worded in a fashion to denote that the American Petroleum Institute either endorses the result cited or recommends or disapproves the use of the perforating system described.
Use of data obtained under API RP 19B tests in reports, articles, papers, periodicals, advertisements, or other published material shall include, as a minimum, all test configuration data not specified by API RP 19B or left to the verifying company’s choosing by API RP 19B and the average measured results of the test.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T18:09:44Z | |
| date available | 2017-09-04T18:09:44Z | |
| date copyright | 2006.09.01 | |
| date issued | 2006 | |
| identifier other | GVQQJBAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=authoF23793FD08/handle/yse/192847 | |
| description abstract | GENERAL This Recommended Practice describes standard procedures for evaluating the performance of perforating equipment so that representations of this performance may be made to the industry under a standard practice. This document supersedes all previously issued editions of API RP 43. Sections 1 – 4 of this Recommended Practice provides means for evaluating perforating systems (multiple shot) in 4 ways: 1. Performance under ambient temperature and atmospheric pressure test conditions. 2. Performance in stressed Berea sandstone targets (simulated wellbore pressure test conditions). 3. How performance may be changed after exposure to elevated temperature conditions. 4. Flow performance of a perforation under specific stressed test conditions. Section 5 of this Recommended Practice provides a procedure to quantify the amount of debris that comes out of a perforating gun during detonation. The purpose of this Recommended Practice is to specify the materials and methods used to evaluate objectively the performance of perforating systems or perforators. IMPLEMENTATION These procedures become effective as of the date of publication. API REGISTERED PERFORATOR SYSTEMS Information on API Registration of perforator systems can be found in Appendix D. REPORTS AND ADVERTISEMENTS Reports, articles, papers, periodicals, advertisements, or similar publications which refer to results from tests conducted according to API RP 19B must not be worded in a fashion to denote that the American Petroleum Institute either endorses the result cited or recommends or disapproves the use of the perforating system described. Use of data obtained under API RP 19B tests in reports, articles, papers, periodicals, advertisements, or other published material shall include, as a minimum, all test configuration data not specified by API RP 19B or left to the verifying company’s choosing by API RP 19B and the average measured results of the test. | |
| language | English | |
| title | API RP 19B | num |
| title | Recommended Practices for Evaluation of Well Perforators - SECOND EDITION | en |
| type | standard | |
| page | 53 | |
| status | Revised | |
| tree | API - American Petroleum Institute:;2006 | |
| contenttype | fulltext |