درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 641-660 of 2792
-
DOD-F-24669/6
Abstract: This specification covers corrosion resisting steel for reforging.
Bars and billets shall be classified by chemical composition by reference to the UNS or type number as defined by ASTM A 314 (see 6.2). ... -
TT-P-28H
Abstract: This specification covers aluminum pigmented, heat resisting paint that will withstand solvents and elevated temperatures. Intended Use: This paint covered by this specification is of two types. Type I liquid ... -
DOD-G-24508A
Abstract: This application covers one grade of grease for multi-purpose use and use in grease lubricated ball and roller bearing operating continuously at temperatures up to 149° Calsius (C) (300° Fahrenheit (F)) and ... -
MIL-M-24144D
Abstract: This specification covers semi-portable frost/dew point monitors used to determine the moisture content of shipboard compressed air systems.
Monitors shall be of the following types and pressure ranges as specified. ...Subject(s) : Chilled surface , Flowmeter , Hygrometer , Mirror temperature control valve , Precipitation detector , Retrofit precipitation , -
MIL-I-24768/6
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-F-16377/7A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
A-A-59002/4
Abstract: This Commercial Item Description covers requirements for a high-power loudspeaker for use in extreme high noise environments or for use over long distances. -
MIL-V-24232A
Abstract: This specification covers actuation valves with 4500 pounds per square inch gage (psig) ratings used for remote pneumatic operation of submarine EMBT blow valves. Intended Use: Valves specified herein are ... -
MIL-DTL-1115E INT AMD 1
Abstract: This specification covers enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 ... -
MIL-STD-2148
Abstract: This Military Standard establishes uniform standards for the selection, installation, maintenance, and repair of currently-approved vibration damping materials, except those used for mounts and pipe damping. Information ... -
A-A-50599
Abstract: The General Services administration has authorized the use of this Commercial Item Description. -
MIL-E-24142/4C
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-S-17000/11
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ...