درباره ما
MIL-DTL-1115E INT AMD 1
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30)
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 2013
Abstract: This specification covers enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered. The paint is a special-purpose, white, alkyd enamel (Formula no. 30) for interior use over either primed steel or primed aluminum (see 6.1). The paint is supplied in a single can and is used as supplied without thinning.Intended Use: This enamel is intended for use on interior bulkhead and shipboard surfaces where fireretardancy is not required. This enamel is a non-lead, non-chromate, non-asbestos material. The dried paint film has been tested to U.S. EPA standards and the paint debris is, as of the time of this specification, a non-hazardous waste. It may be applied by brush, spray or roller and is appropriate for any metal or wood structure. During development, this enamel was easily sprayed with a Binks #7 HTES (high transfer efficiency special) gun. Spraying with a high volume, low pressure (HVLP) gun was successful using an AIRVERTER® HVLP Sprayer available from Smith Eastern Corporation. The basic formulation provides an enamel of a white color. This enamel has been formulated to comply with air pollution regulations which allow a maximum VOC of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered, and does not require thinning for brush or spray application.
Collections
:
-
Statistics
MIL-DTL-1115E INT AMD 1
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T17:53:52Z | |
| date available | 2017-09-04T17:53:52Z | |
| date copyright | 09/10/2013 | |
| date issued | 2013 | |
| identifier other | FFPGGFAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=autho1826AF67FCdardstandardsfen/handle/yse/177009 | |
| description abstract | This specification covers enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered. The paint is a special-purpose, white, alkyd enamel (Formula no. 30) for interior use over either primed steel or primed aluminum (see 6.1). The paint is supplied in a single can and is used as supplied without thinning.Intended Use: This enamel is intended for use on interior bulkhead and shipboard surfaces where fireretardancy is not required. This enamel is a non-lead, non-chromate, non-asbestos material. The dried paint film has been tested to U.S. EPA standards and the paint debris is, as of the time of this specification, a non-hazardous waste. It may be applied by brush, spray or roller and is appropriate for any metal or wood structure. During development, this enamel was easily sprayed with a Binks #7 HTES (high transfer efficiency special) gun. Spraying with a high volume, low pressure (HVLP) gun was successful using an AIRVERTER® HVLP Sprayer available from Smith Eastern Corporation. The basic formulation provides an enamel of a white color. This enamel has been formulated to comply with air pollution regulations which allow a maximum VOC of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered, and does not require thinning for brush or spray application. | |
| language | English | |
| title | MIL-DTL-1115E INT AMD 1 | num |
| title | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) | en |
| type | standard | |
| page | 21 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013 | |
| contenttype | fulltext |