درباره ما
ASME - ASME International: Recent submissions
Now showing items 581-600 of 1083
-
ASME PTC 6
Abstract: This Code may be used for testing of steam turbines operating either with a significant amount of superheat in the initial steam (typically fossil-fueled units) or predominantly within the moisture region (typically ... -
ASME A112.1070
Abstract: This Standard covers water temperature limiting devices intended to limit the hot or tempered water temperature supplied to fittings for fixtures such as sinks, bidets, lavatories, and bathtubs to reduce the risk of scalding. ... -
ASME PTC 39
Abstract: This Code covers steam traps which are devices used for removing condensate and noncondensibles from steam systems. -
ASME PTC 21
Abstract: OBJECT AND SCOPE
The object of the test is to determine the performance characteristics of equipment designed to collect particulate matter from a gas stream. This Code specifies methods for determining the ... -
ASME BOI
Abstract: The PED embraces all Pressure Equipment subject to an internal pressure of gas or fluid above 0.5 bar. It applies to new Equipment fabricated in the EU (and to new or used Equipment imported from countries outside the EU). ... -
ASME A112.1.3
Abstract: This Standard establishes physical requirements and methods of testing for air gap fittings for protecting against back siphonage and back pressure backflow. -
ASME B5.40
Abstract: Object and Scope
This standard establishes (1) the American practice for the construction of spindle noses for horizontal boring machines by showing a number of types of such construction, (2) the ... -
ASME B16.21
Abstract: This Standard covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets. These gaskets are dimensionally suitable for use with flanges described in the referenced flange standards. -
ASME B1.20.7
Abstract: The purpose of this document is to provide standards for application to the threaded parts of hose couplings, valves, nozzles, and all other fittings used in direct connection with hose intended for domestic, industrial, ... -
ASME B29.22
Abstract: The drop forged rivetless chain has widespread use in many industries on trolleys, scraper flights, assembly, and similar conveyors. Because materials do not tend to pack in its open structure, the drop forged rivetless ... -
ASME AG-1
Abstract: This Code provides requirements for the performance, design, fabrication, installation, inspection, acceptance testing, and quality assurance of equipment used in air and gas treatment systems in nuclear facilities. ... -
ASME B30.7 INTERPRETATIONS
Abstract: FOREWORD
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Standards Committee, Safety Standard for Cableways, Cranes, ... -
ASME B5.52
Abstract: This Standard applies to hydraulic and mechanical power presses having a one-piece frame that guides the slide and supports the bolster, adjustable bed, or horn. The frame is configured to provide unrestricted access to ... -
ASME STP-PT-053
Abstract: Develop a criteria document covering the development of the TS design rules for the U-tube, Fixed, and Floating Head TS HEs configurations contained in Part UHX of Section VIII Division 1, 2010 Edition. The criteria document ... -
ASME PTB-8
Abstract: The ASME Codes and material specifications include specific requirements for use of the materials in ASME Code construction. However, they do not address all requirements. It is the responsibility of the user to specify ... -
ASME PTC 24
Abstract: OBJECT AND SCOPE
This Code provides standard directions and rules for the conducting and reporting of tests on single or multi-stage ejector units.
The primary object of the test measurements described ... -
ASME B30.6
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-handling related equipment. For the ... -
ASME B30.5 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ... -
ASME B89.4.10
Abstract: A critical issue in industrial coordinate metrology is the measurement of a work piece to assure compliance with its dimensional requirements. When using a computerized Coordinate Measurement System (CMS), the usual ... -
ASME B18.2.8
Abstract: This Standard covers the recommended clearance hole sizes for #0 through 1.5 in. and M1.6 through M100 metric fasteners in three classes of clearance using a close-, normal-, and loose-fit category.