ACI 349M
Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349M-06) and Commentary
Organization:
ACI - American Concrete Institute
Year: 2006
Abstract: This Code provides minimum requirements for design and construction of nuclear safety-related concrete structures and structural members for nuclear power generating stations. Safety-related structures and structural members subject to this standard are those concrete structures that support, house, or protect nuclear safety class systems or component parts of nuclear safety class systems.
Specifically excluded from this Code are those structures covered by "Code for Concrete Reactor Vessels and Containments," ASME Boiler and Pressure Vessel Code Section III, Division 2, and pertinent General Requirements (ACI 359).
This Code includes design and loading conditions that are unique to nuclear facilities, including shear design under biaxial tension conditions, consideration of thermal and seismic effects, and impact and impulsive loads.
For structural concrete, fc′ shall not be less than 17 MPa, unless otherwise specified.
This Code shall govern in all matters pertaining to design and construction of reinforced concrete structures, as defined in 1.1.1, except wherever this Code is in conflict with the specific provisions of the authority having jurisdiction (AHJ).
This Code shall govern in all matters pertaining to design, construction, and material properties wherever this Code is in conflict with requirements contained in other standards referenced in this Code.
For special structures, such as arches, tanks, reservoirs, bins and silos, blast-resistant structures, and chimneys, provisions of this Code shall govern where applicable.
Intentionally left blank.
Intentionally left blank.
Concrete on steel form deck
Design and construction of structural concrete slabs cast on stay-in-place, noncomposite steel form deck are governed by this Code.
This Code does not govern the design of structural concrete slabs cast on stay-in-place, composite steel form deck. Concrete used in the construction of such slabs shall be governed by Chapters 1 through 7 of this Code, where applicable.
Special provisions for earthquake resistance— Provisions of Chapter 21 shall be satisfied. See 21.2.1.
Specifically excluded from this Code are those structures covered by "Code for Concrete Reactor Vessels and Containments," ASME Boiler and Pressure Vessel Code Section III, Division 2, and pertinent General Requirements (ACI 359).
This Code includes design and loading conditions that are unique to nuclear facilities, including shear design under biaxial tension conditions, consideration of thermal and seismic effects, and impact and impulsive loads.
For structural concrete, fc′ shall not be less than 17 MPa, unless otherwise specified.
This Code shall govern in all matters pertaining to design and construction of reinforced concrete structures, as defined in 1.1.1, except wherever this Code is in conflict with the specific provisions of the authority having jurisdiction (AHJ).
This Code shall govern in all matters pertaining to design, construction, and material properties wherever this Code is in conflict with requirements contained in other standards referenced in this Code.
For special structures, such as arches, tanks, reservoirs, bins and silos, blast-resistant structures, and chimneys, provisions of this Code shall govern where applicable.
Intentionally left blank.
Intentionally left blank.
Concrete on steel form deck
Design and construction of structural concrete slabs cast on stay-in-place, noncomposite steel form deck are governed by this Code.
This Code does not govern the design of structural concrete slabs cast on stay-in-place, composite steel form deck. Concrete used in the construction of such slabs shall be governed by Chapters 1 through 7 of this Code, where applicable.
Special provisions for earthquake resistance— Provisions of Chapter 21 shall be satisfied. See 21.2.1.
Subject: admixtures
Collections
:
Show full item record
| contributor author | ACI - American Concrete Institute | |
| date accessioned | 2017-09-04T16:37:24Z | |
| date available | 2017-09-04T16:37:24Z | |
| date copyright | 01/01/2006 | |
| date issued | 2006 | |
| identifier other | VFHYKCAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=autho1826AF67FCdardstandardsfen/handle/yse/100900 | |
| description abstract | This Code provides minimum requirements for design and construction of nuclear safety-related concrete structures and structural members for nuclear power generating stations. Safety-related structures and structural members subject to this standard are those concrete structures that support, house, or protect nuclear safety class systems or component parts of nuclear safety class systems. Specifically excluded from this Code are those structures covered by "Code for Concrete Reactor Vessels and Containments," ASME Boiler and Pressure Vessel Code Section III, Division 2, and pertinent General Requirements (ACI 359). This Code includes design and loading conditions that are unique to nuclear facilities, including shear design under biaxial tension conditions, consideration of thermal and seismic effects, and impact and impulsive loads. For structural concrete, fc′ shall not be less than 17 MPa, unless otherwise specified. This Code shall govern in all matters pertaining to design and construction of reinforced concrete structures, as defined in 1.1.1, except wherever this Code is in conflict with the specific provisions of the authority having jurisdiction (AHJ). This Code shall govern in all matters pertaining to design, construction, and material properties wherever this Code is in conflict with requirements contained in other standards referenced in this Code. For special structures, such as arches, tanks, reservoirs, bins and silos, blast-resistant structures, and chimneys, provisions of this Code shall govern where applicable. Intentionally left blank. Intentionally left blank. Concrete on steel form deck Design and construction of structural concrete slabs cast on stay-in-place, noncomposite steel form deck are governed by this Code. This Code does not govern the design of structural concrete slabs cast on stay-in-place, composite steel form deck. Concrete used in the construction of such slabs shall be governed by Chapters 1 through 7 of this Code, where applicable. Special provisions for earthquake resistance— Provisions of Chapter 21 shall be satisfied. See 21.2.1. | |
| language | English | |
| title | ACI 349M | num |
| title | Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349M-06) and Commentary | en |
| type | standard | |
| page | 157 | |
| status | Active | |
| tree | ACI - American Concrete Institute:;2006 | |
| contenttype | fulltext | |
| subject keywords | admixtures | |
| subject keywords | aggregates | |
| subject keywords | anchorage (structural) | |
| subject keywords | authority having jurisdiction (AHJ) | |
| subject keywords | beam-column frame | |
| subject keywords | beams (supports) | |
| subject keywords | building codes | |
| subject keywords | cements | |
| subject keywords | cold weather construction | |
| subject keywords | columns (supports) | |
| subject keywords | combined stress | |
| subject keywords | composite construction (concrete and steel) | |
| subject keywords | composite construction (concrete to concrete) | |
| subject keywords | compressive strength | |
| subject keywords | concrete construction | |
| subject keywords | concrete cover | |
| subject keywords | concrete slabs | |
| subject keywords | concretes | |
| subject keywords | construction joints | |
| subject keywords | continuity (structural) | |
| subject keywords | cracking (fracturing) | |
| subject keywords | creep properties | |
| subject keywords | curing | |
| subject keywords | deep beams | |
| subject keywords | deflection | |
| subject keywords | drawings (drafting) | |
| subject keywords | earthquake-resistant structures | |
| subject keywords | edge beams | |
| subject keywords | embedded service ducts | |
| subject keywords | flexural strength | |
| subject keywords | floors | |
| subject keywords | folded plates | |
| subject keywords | footings | |
| subject keywords | formwork (construction) | |
| subject keywords | frames | |
| subject keywords | hot weather construction | |
| subject keywords | inspection | |
| subject keywords | joists | |
| subject keywords | load tests (structural) | |
| subject keywords | loads (forces) | |
| subject keywords | mixing | |
| subject keywords | mixture | |
| subject keywords | modulus of elasticity | |
| subject keywords | moments | |
| subject keywords | nuclear power plants | |
| subject keywords | nuclear reactor containments | |
| subject keywords | nuclear reactor safety | |
| subject keywords | nuclear reactors | |
| subject keywords | pipe columns | |
| subject keywords | pipes (tubes) | |
| subject keywords | placing | |
| subject keywords | precast concrete | |
| subject keywords | prestressed concrete | |
| subject keywords | prestressing steels | |
| subject keywords | proportioning | |
| subject keywords | quality control | |
| subject keywords | reinforced concrete | |
| subject keywords | reinforcing steels | |
| subject keywords | roofs | |
| subject keywords | safety | |
| subject keywords | serviceability | |
| subject keywords | shear strength | |
| subject keywords | shearwalls | |
| subject keywords | shells (structural forms) | |
| subject keywords | spans | |
| subject keywords | specifications | |
| subject keywords | splicing | |
| subject keywords | strength | |
| subject keywords | strength analysis | |
| subject keywords | structural analysis | |
| subject keywords | structural design | |
| subject keywords | T-beams | |
| subject keywords | temperature | |
| subject keywords | torsion | |
| subject keywords | walls | |
| subject keywords | water | |
| subject keywords | welded wire reinforcement |

درباره ما