ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 641-660 of 832
-
MIL-PRF-62565B
Abstract: This specification covers the performance, test, manufacture and acceptance requirements for the engine air cleaner, referred to herein as the air cleaner, and the replaceable air filter element, referred to herein as the ...Subject(s) : Absolute filter , Airflow , Bradley fighting vehicle family , Dust , Flame resistant , Leakage , Military tracked vehicles , Piezometer , Scavenge vacuum , -
MIL-PRF-62411A
Abstract: This specification establishes the design, performance, inspection, and acceptance requirements for the heat exchangers used in Nuclear Biological Chemical (NBC) system of the M1A1 and M1A2 tanks and its three major ...Subject(s) : Condenser , NBC components , NBC protection , Precooler , -
MIL-PRF-62494D VALID NOTICE 1
Abstract: This specification covers the performance, test, and manufacture requirements for the direct acting shock absorber for use on military tracked vehicles in the Bradley Fighting Vehicle (BFV) Family. Intended Use: ...Subject(s) : Axial load , Bearing , Compression , Cycling rate , Damper , Damping resistance , Torque , Valve spring , -
MIL-PRF-46750/2A
Abstract: This specification is approved for use by the U.S. Army Tank-automotive and Armaments Command, Department of the Army, and is available for use by all Departments of Defense.
The requirements for acquiring the product ... -
MIL-PRF-46176B VALID NOTICE 1
Abstract: This specification covers silicone-based hydraulic brake fluid for use in hydraulic brake systems at ambient temperatures ranging from +55°C to −55°C. The fluid is identified by military symbol BFS; and ...Subject(s) : Hydraulic , NATO STANAG 1135 , Viscosity , -
A-A-52525A
Abstract: This CID covers horns and buzzers used in 12- or 24-volt (V) direct current (dc) circuits as warning signals in tactical vehicles, combat vehicles, and other equipment operating under severe and extreme conditions of shock, ... -
A-A-59157
Abstract: This CID covers wheel rings for pneumatic tire wheels for wheeled tactical vehicles. -
A-A-52505A
Abstract: This CID covers battery retainers, used widely in automotive tactical vehicles to hold secure 2HN and 6TN batteries.
The battery retainers shall be classified as follows:
Type A - 2HN single battery
Type B - ... -
MIL-PRF-62061D
Abstract: This specification covers a 28 volt (V) direct current (dc), blower-cooled generator with rated output of 300 amperes (A) (see 6.1).Intended Use: The generators described by this performance specification are ...Subject(s) : Capacitors , Current , Electrical , Tracked vehicle , Voltage , -
A-A-52552
Abstract: This CID covers a 24 volt (V), waterproof, double filament, infrared headlight used in military vehicles. -
F-F-351/4
Abstract:
The General Services Administration has authorized the use of this federal specification sheet by all federal agencies.
The complete requirements for procuring the oil filter elements described herein shall consist ... -
MIL-PRF-53012A VALID NOTICE 1
Abstract: This specification covers kits containing items necessary to suspend a 6- or 4-inch collapsible hoseline at road crossings, small streams, and areas where nestable culverts or road guards may not be used.
Hoseline ...Subject(s) : Crossing , Hose saddle , Turnbuckle , -
A-A-52587
Abstract: This CID covers requirements for one type of rope deck hook. The hook is intended for use in bolted tank service.

درباره ما