Now showing items 741-760 of 1186

    • TIA TIA-1156-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2010
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Specification has been produced by the 3rd Generation Partnership Project 2 (3GPP2). This document defines the OAM&P Stage 2 and 3 requirements and interface definitions for CDMA- and cdma2000®1-based ...
    • TIA TIA-1038 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2009
      Organization : TIA - Telecommunications Industry Association
      Abstract: The objective of these tests is to demonstrate mobile station compliance to Position Determination Services messaging and protocol requirements in the cdma2000 family of standards, with emphasis on the reference (contained ...
    • TIA TIA-664.508-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
    • TIA TIA-1020 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2007
      Organization : TIA - Telecommunications Industry Association
      Abstract: The purpose of this document is to specify the intersystem operations that enable a wireless system to provide IP-Based location services.
    • TIA TIA-868 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: PURPOSE AND SCOPE
      This document provides recommended ANS/TIA/EIA-41-D enhancements required to support TIA/EIA-41 SIM (Subscription Identification Module) roaming one-way into GSM serving areas (without ...
    • TIA TIA-455-33-B 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2013
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      This test is intended to verify the ability of an optical fiber cable to perform satisfactorily as required by Detail Specifications (a) while undergoing tensile and bending forces and (b) ...
    • TIA TIA-5150000 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: This EIA Generic Specification describes the mechanical and optical performance of optical fiber and optical cable splices used in optical waveguide communications, Excluded are splices unique to the fiber and cable ...
    • TIA TIA/EIA-732-1023 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2001
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      [TIA/EIA-732-630] describes the CDPD Layer 3 usage accounting information and the protocol for exchanging that accounting information between CDPD Service Providers. The accounting information ...
    • TIA TIA-1196 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      Communication during times of disaster/crisis is critical to ensure that needed resources are deployed to mitigate the effects of a disaster. Unfortunately, times of disaster are when ...
    • TIA TIA-899 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
      Abstract: This Standard specifies the electrical characteristics of low-voltage differential signaling interface circuits that may be employed when specified for the interchange of binary signals between equipment sharing a common ...
    • TIA J-STD-026 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;1999
      Organization : TIA - Telecommunications Industry Association
      Abstract: This standard addresses semiconductor chip design. It is intended for applications utilizing standard substrates, materials, assembly, and test methods as well as established semiconductor fabrication and bumping processes. ...
    • TIA TIA/EIA-553-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;1999
      Organization : TIA - Telecommunications Industry Association
      Abstract: These technical requirements form a compatibility standard for a cellular radio telecommunications system. Their purpose is to ensure that a mobile station can obtain service in any cellular system manufactured according ...
    • TIA TSB-62-3 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: This method i s only applicable to class I a multimode, graded index optical fibers with profile parameter, g, approximately equal to 2. The fibers may be part of a fiber optic component such as an optical transmitter, ...
    • TIA TIA-1124 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: INTRODUCTION
      Multimedia Doman (MMD) specifications [3] enable an operator to apply Quality of Service (QoS) policy controls to the Internet Protocol (IP) Connectivity Access Network on session-based ...
    • TIA TIA-856.400-C 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2011
      Organization : TIA - Telecommunications Industry Association
      Abstract: Introduction
      General Overview
      The Connection Layer controls the state of the air-link, and it prioritizes the traffic that is sent over it.
      This section presents the default protocols for the ...
    • TIA TIA-41.651-E 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2012
      Organization : TIA - Telecommunications Industry Association
    • TIA TIA-455-95-A 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2005
      Organization : TIA - Telecommunications Industry Association
      Abstract: This procedure may be used for, but is not limited to, measuring the attenuation of the fiber or cable, the loss of terminating devices or methods, the amount of optical power coupled into the fiber by a source, or the ...
    • TIA TSB-62-1 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2002
      Organization : TIA - Telecommunications Industry Association
      Abstract: The method is generally destructive. A sample of a population is tested. The accuracy of inferences that are drawn depends on the sampling frequency and the degree to which the sample is representative.
      The probability ...
    • TIA TIA-1017 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2005
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document specifies the procedures to test implementations of VMR-WB-compatible variable-rate speech codecs either by meeting the bit-exact implementation, or meeting recommended minimum performance requirements. ...
    • TIA TSB-147 

      Type: standard
      Source: TIA - Telecommunications Industry Association:;2009
      Organization : TIA - Telecommunications Industry Association
      Abstract: This document compares, in an orderly manner, the transmission requirements in ANSI/TIA-464-C-2002, "Requirements for Private Branch eXchange (PBX) Switching Equipment" and those in ES 201 168 version 1.2.1, "Speech ...