درباره ما
IPC TM-650 2.4.37.2
Evaluation of Hand Soldering Tools on Heavy Thermal Loads
Organization:
IPC - Association Connecting Electronics Industries
Year: 1993
Abstract: This test method is to be used for the evaluation of hand soldering tools under a simulated heavy load such as that presented by PWBs with abnormally thick ground or power planes. Separate test methods (IPC-TM-650, Methods 2.4.37 and 2.4.37.1) are provided for evaluation of tools under normal operating conditions. The purpose of this test method is to provide a means by which hand soldering tools may be evaluated under a standard controlled set of conditions. This method may be used to either evaluate a single tool's performance or for comparison of several tools.
Note: Tip geometry, mass, contact area (working face), contact angle, and idle temperature can significantly skew the test results.
Note: Tip geometry, mass, contact area (working face), contact angle, and idle temperature can significantly skew the test results.
Collections
:
-
Statistics
IPC TM-650 2.4.37.2
Show full item record
| contributor author | IPC - Association Connecting Electronics Industries | |
| date accessioned | 2017-09-04T15:28:58Z | |
| date available | 2017-09-04T15:28:58Z | |
| date copyright | 07/01/1993 | |
| date issued | 1993 | |
| identifier other | NWIGCAAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=autho1826AF6708/handle/yse/30202 | |
| description abstract | This test method is to be used for the evaluation of hand soldering tools under a simulated heavy load such as that presented by PWBs with abnormally thick ground or power planes. Separate test methods (IPC-TM-650, Methods 2.4.37 and 2.4.37.1) are provided for evaluation of tools under normal operating conditions. The purpose of this test method is to provide a means by which hand soldering tools may be evaluated under a standard controlled set of conditions. This method may be used to either evaluate a single tool's performance or for comparison of several tools. Note: Tip geometry, mass, contact area (working face), contact angle, and idle temperature can significantly skew the test results. | |
| language | English | |
| title | IPC TM-650 2.4.37.2 | num |
| title | Evaluation of Hand Soldering Tools on Heavy Thermal Loads | en |
| type | standard | |
| page | 4 | |
| status | Active | |
| tree | IPC - Association Connecting Electronics Industries:;1993 | |
| contenttype | fulltext |