NAVY - AS - Naval Air Systems Command: Recent submissions
Now showing items 661-680 of 2147
-
MIL-DTL-6363/8A
Abstract:
This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-6363. ... -
MIL-DTL-19803G
Abstract: This specification covers one type of aircraft converter, GCU-24A/A, used for storing and pressuring 10 liters of liquid oxygen. Intended Use: The converter covered by this specification is intended to be ...Subject(s) : Pressurize , -
MIL-DTL-85052B VALID NOTICE 1
Abstract: This specification establishes the design and test requirements for clamp, loop, cushion, primarily intended for general clamping of tubing for aircraft hydraulic systems. Intended Use: The clamps are intended ...Subject(s) : Clamping cables , Clamping tubing , Fastening aircraft hydraulic lines , Fastening device , Ozonized air , Rubber cushion , Ultraviolet (UV) radiation , -
A-A-59315/18
Abstract: This commercial item description sheet (CID) covers a cobalt-chromium-nickel-tungsten powder that is applied using either plasma arc or combustion gas (flame spray) techniques. -
MIL-V-85402
Abstract: This specification establishes the requirements for manufacture and acceptance of the FZU-43/B Pyrotechnic-Actuated Dual Air Valve, referred to herein as the valve. Intended Use: The valve is intended for ... -
MIL-I-23145B
Abstract: This specification covers the requirements for three types of life preserver inflation assemblies and three different styles of lanyards. Intended Use: The inflation assemblies covered by this specification ... -
MIL-DTL-29611
Abstract: This specification covers the general requirements and inspections for the AIRSAVE (Aircrew Integrated Recovery Survival, Armor, Vest and Equipment), survival vest designed to integrate with soft and hard body armor, ...Subject(s) : AIRSAVE , Armor , body , Armor , integrated protection , Pocket , modular , Protection system , -
MIL-P-82522C
Abstract: This specification covers one grade of jet engine propellant, which is a well defined chemical compound, principally composed of exo- and endo-isomers of tetrahydrodi(methylcyclopentadiene) (See 6.1). Intended ...Subject(s) : Propellant , RJ-4 , Synthetic hydrocarbon fuel , Turbine fuel , -
MIL-C-29600/23
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the contacts described herein shall consist of this specification and the ...

درباره ما