درباره ما
ARMY - GL - U.S. Army Natick Soldier Research, Development & Engineering Center: Recent submissions
Now showing items 501-520 of 732
-
A-A-50033A
Abstract: The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specification MIL-S-798 (cancelled). Intended Use: The athletic ... -
A-A-52071
Abstract: Intended Use: The tapes are used as bindings in the fabrication of clothing and other textile items. Type I, ½ inch tape is used as a backseam tape in footwear items. -
MIL-H-44099A
Abstract: This document covers a ballistic protective helmet consisting of a laminated coated aramid cloth shell with a replaceable suspension assembly, headband, and chin strap.Intended Use: The helmet is intended for ... -
MIL-PRF-44408C
Abstract: This document covers three types of lightweight electrical equipment shelters designed for transport on both the M1037 and M1097 High Mobility Multipurpose Wheeled Vehicle (HMMWV). These shelters are transported by rail, ...Subject(s) : Command post , Electronics , EMI shield , HMMWV , Multipurpose , SICPS , -
MIL-PRF-32197
Abstract: This specification covers the performance and acceptance requirements for a nonpowered, liquid fuel burning, 12,000 BTU, radiant space heater for use in the Soldier Crew Tent (SCT) and other 4 or 5 man tents.Intended ...Subject(s) : Diesel fired space heater , JP-8 fired space heater , Tent heating , -
MIL-A-2334J
Abstract: This specification covers a one-piece impermeable apron used for protection against toxicological warfare agents. Intended Use: The apron is for use in the Kit, Gas Casualty Treatment, M-2, and related ...Subject(s) : Gas casualty treatment , Protection , -
MIL-C-368J
Abstract: This specification covers rayon lining cloths for use in various clothing items. Intended Use: The lining cloth is intended for use in the following garments:Class 1 - General utility use, garrison ...
Subject(s) : Fabric , Lining , Uniform , -
MIL-DTL-44481A
Abstract: This document covers one type of cargo parachute release assembly consisting of a release mechanism, upper and lower suspension link assemblies, parachute connector assemblies and a timer assembly. The parachute connector ...Subject(s) : Airdrop System , Cargo loads , Parachute , Parachute Mechanism , Resupply , -
MIL-S-52229
Abstract: —This specification covers the requirements for polyethylene water siphon tubes. Intended Use: —The siphon tube is intended to be used as a device for dispensing drinking water from bulk water ... -
MIL-C-43528A
Abstract: This document covers one type of roller conveyor. Intended Use: The high capacity roller conveyor is intended for use in support of airborne operations and other load conveying applications involving loads ... -
MIL-C-43375E
Abstract: This specification covers 12.5 ounce, nylon, duck cloth. Intended Use: The cloth is intended for use in collapsible canteen covers and other equipage items.Subject(s) : Canteen , Cover , Equipage , Water repellent treated , -
GGG-T-00563B
Abstract: This specification covers tools used by blacksmiths for cutting, necking, and breaking steel or metals of the same general nature; smoothing and finishing flat forgings; grooving and drawing down forgings; setting down ... -
MIL-B-40092D
Abstract: This document covers polyester cord-edge braid. Intended Use: The braid is intended for use as piping on clothing.Subject(s) : Braid , polyester , Clothing , Piping , -
MIL-F-43832C
Abstract: This document covers one type large size combat field pack fabricated from olive green nylon duck, webbings, tape, coated cloth and metallic hardware (see 6.1). Intended Use: The large field pack, ...