درباره ما
API - American Petroleum Institute: Recent submissions
Now showing items 741-760 of 1822
-
API MPMS 19.4
Abstract: This standard provides methodology to estimate emissions of individual hydrocarbon species using the total emissions of multicomponent hydrocarbon mixtures (such as crude oils and gasoline) estimated from API MPMS ... -
API PUBL 4643
Abstract: Chemicals released into the vadose zone, from either accidental spills or wastes managed on the land, may migrate to groundwater, depending upon the nature of the release, design of the waste management facility, ... -
API STD 547
Abstract: This standard covers the requirements for form-wound induction motors for use in general-purpose petroleum, chemical and other industrial severe duty applications. These motors:
a. Are rated 250 hp (185 kW) through ... -
API RP 10B-2
Abstract: This standard specifies methods and gives recommendations for the testing of cement slurries and related materials under simulated well conditions. -
API RP 5LT
Abstract: The recommendations provided herein apply to the transportation of coated or bare line pipe in sizes 2 3/8 in. (60.3 mm) and larger, on trailer.
Purpose
This recommended ... -
API MPMS 19.3 PART B
Abstract: This test method may be used to establish evaporative rim seal loss factors for rim seals used on external and internal floating-roof tanks. The test method involves passing a controlled flow rate of air through a test ... -
API PUBL 4644
Abstract: Scope:
FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS ... -
API 510
Abstract: General Application
Coverage
This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure- relieving ... -
API RP 2030
Abstract: When addressing loss prevention an organization should consider the use of fixed fire protection systems, one of which is water spray systems. Water spray systems appear similar to sprinkler systems in some respects; ... -
API MPMS 17.10.2
Abstract: This standard details the steps needed to properly measure and account for the quantities of Liquefied Petroleum and Chemical Gas cargoes described in IGC Chapter 17, excluding liquefied natural gas (LNG), on board ... -
API SPEC 12F
Abstract: General
This specification covers material, design, fabrication, and testing requirements for shop-fabricated vertical, cylindrical, aboveground, closed top, welded steel storage tanks in various ... -
API SPEC 2C
Abstract: This specification provides requirements for design, construction, and testing of new offshore pedestal-mounted cranes. For the purposes of this specification, offshore cranes are defined as pedestal-mounted elevating and ... -
API RP 1637
Abstract: PURPOSE OF THE SYSTEM
This recommended practice describes a system for marking equipment used to store and handle bulk petroleum, alcoholblended petroleum and biodiesel products. The marking system ... -
API PUBL 4531
Abstract: FOREWORD
API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS OF A GENERAL NATURE. WITH RESPECT TO PARTICULAR CIRCUMSTANCES, LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS SHOULD BE REVIEWED.
API IS NOT ... -
API RP 2216
Abstract: This recommended practice provides information concerning the potential for ignition of hydrocarbons that are exposed to hot surfaces in the open air. Hydrocarbon liquids, when heated sufficiently, can ignite without the ... -
API RP 2SM
Abstract: The main purpose of this document is to provide guidelines on the use of synthetic fiber ropes for offshore mooring applications. The secondary purpose of this document is to highlight differences between synthetic rope ... -
API MPMS 6.1
Abstract: This publication describes the metering function of a LACT unit and is intended to complement API Specification II N,Specificationfor Lease Automatic Custody Transfer (LACT) Equipment. LACT equipment includes a meter (either ... -
API MPMS 22.1
Abstract: This API MPMS Chapter is intended to be a guideline for the development of testing protocols to document the performance characteristics of any of the following hydrocarbon fluid measurement devices:
• ...