درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 681-700 of 2792
-
MIL-T-24649/4
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-V-23953C
Abstract: This specification covers requirements for the construction, testing, and operation of combined vent-check valves with a nominal pressure seating of 4,500 pounds per square inch (lb/in2), for use in submarine ...Subject(s) : Blowdown , Check poppet , High-pressure air blow , Spring loaded check valves , Water-slug , -
MIL-I-3190F
Abstract: This specification covers coated flexible sleeving suitable for use as electrical insulation.
The coated flexible electrical insulation sleeving shall be furnished in the following classes, types and categories as ...Subject(s) : Dielectric breakdown , Flammability , Hydrolytic stability , Thermal endurance , Thermal stability , -
MIL-STD-1686C
Abstract: The purpose of this standard is to establish comprehensive requirements for an ESD control program to minimize the effects of ESD on parts, assemblies, and equipment. An effective ESD control program will increase reliability ...Subject(s) : assemblies , Charged device model , Classification , equipment , Human body model , Machine model , parts , Protected areas , Protective covering , Static Electricity , -
MIL-E-23155C
Abstract: This specification covers a hooded air-inflated escape appliance with pouch of coated nylon fabric construction and equipped with two pressure relief valves. Intended Use: Escape appliances made in accordance ...Subject(s) : Escape appliance , Pouch , Valve , pressure , relief , -
MIL-STD-1627C
Abstract: This standard covers pipe bending, heat treatment, and inspection requirements and acceptance criteria for piping used for ships of the United States Navy. The standard applies to pipes of ¼ nominal pipe size (nps) ...Subject(s) : Die , Mandrel , Material base , Support , internal , -
MIL-DTL-24704B
Abstract: This specification covers the requirement for a 4-bolt, square flange for use in 3000 pounds per square inch (lb/in²) hydraulic systems.Intended Use: Flanges covered by this specification are intended ...Subject(s) : Flange style , pipe , Flange style , tube , Flange , right angle , Flange , straight , -
MIL-PRF-85045/19A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF- ...