W-S-896F

SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION)

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T18:34:39Z
date available	2017-09-04T18:34:39Z
date copyright	05/31/1999
date issued	1999
identifier other	JHCRIAAAAAAAAAAA.pdf
identifier uri	http://mapnamagz.yabesh.ir/std;query=autho1826AF67FCdardstandardsfen/handle/yse/216824
description abstract	This specification covers the general requirements for flush mounted toggle and lock switches, designed for mounting in switch boxes by means of an integral strap (see 6.1). Intended Use: Switches, as covered by this specification, are intended for use in any electrical circuit within voltage and current limitations and at full voltage to ground except AC-DC type switches must not be used on circuits more than 125 volts to ground and the current rating should be reduced 50 percent on inductive loads.
language	English
title	W-S-896F	num
title	SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION)	en
type	standard
page	6
status	Active
tree	DLA - CC - DLA Land and Maritime:;1999
contenttype	fulltext