درباره ما
MIL-HDBK-21
WELDED JOINT DESIGNS, ARMORED-TANK TYPE
| contributor author | ARMY - AT - Tank-Automotive and Armaments Command | |
| date accessioned | 2017-09-04T15:51:16Z | |
| date available | 2017-09-04T15:51:16Z | |
| date copyright | 35032 | |
| date issued | 1995 | |
| identifier other | QJJZDAAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std;query=autho1826AF676/handle/yse/54408 | |
| description abstract | This handbook gives guidelines for particular welded joint designs used in the development of military armored tank type vehicles. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook covers welded joint designs when one or more of the materials being welded is armor. The provisions of this handbook refer entirely to full penetration-weld joints. This handbook covers two basic weld types and variations of each. These weld types are groove type and fillet type. Intended Use: The joints specified in this handbook are intended for use in military vehicles or other structures that are to be subjected to ballistic attack. | |
| language | English | |
| title | MIL-HDBK-21 | num |
| title | WELDED JOINT DESIGNS, ARMORED-TANK TYPE | en |
| type | standard | |
| page | 25 | |
| status | Active | |
| tree | ARMY - AT - Tank-Automotive and Armaments Command:;1995 | |
| contenttype | fulltext | |
| subject keywords | Armored | |
| subject keywords | tank type | |
| subject keywords | Continuous fillet | |
| subject keywords | Double-bevel-grooved | |
| subject keywords | corner joint | |
| subject keywords | Intermittent-fillet-welded joint | |
| subject keywords | Single-v-grooved | |
| subject keywords | butt joint | |
| subject keywords | Staggered intermittent-fillet | |
| subject keywords | Welded joint designs |
