درباره ما
ARMY - AT - Tank-Automotive and Armaments Command: Recent submissions
Now showing items 701-720 of 832
-
A-A-57174A
Abstract: This commercial item description covers dual wheel mounting cap, nut, which is used to mount and secure dual wheels on the vehicle's axle.Subject(s) : Axle , Tactical vehicle , -
MIL-PRF-62382C
Abstract: This specification covers one type of in-line hydraulic pressure relief valve used in a military combat vehicle to control system differential pressure at a predetermined level (see 6.1).Intended Use: The ...Subject(s) : Hydraulic fluid , -
A-A-52472A
Abstract: This CID covers requirements for a filter assembly with a fine filtration element for use in the fuel systems of internal combustion gasoline engines and personnel heaters. -
A-A-59800A
Abstract: This commercial item description (CID) covers a range of 100{}olids, two-component aliphatic polyurea coatings intended for use on cleaned, pretreated and primed (when required) substrates which include: steel, galvanized ...Subject(s) : Abrasion protection , Chip resistant , Corrosion protection , Corrosion resistance , Damage protection , Flame resistance , Impact protection , Sound damping , Spall resistance , Tough , UV durable , Vibration damping , -
MIL-DTL-62270B
Abstract: This specification covers one type of full-tracked tank chassis which with subsequent adaptation mounts a 60 foot (ft) launched bridge. This specification is limited to the vehicular chassis of the launcher. Intended ...Subject(s) : AVL , Transporter , -
A-A-52017A VALID NOTICE 1
Abstract: This commercial item description (CID) covers a commercial, four-wheel-mounted, diesel-engine-driven air compressor. The air compressor will be complete with all components that are customarily offered with the air compressor ...Subject(s) : Four-wheel-mounted , Heavy duty or extreme service , -
MIL-PRF-46167D
Abstract: This performance specification covers one grade of internal combustion compression-ignition engine lubricating oil with military symbol OEA-30 and NATO Code O-183, suitable for arctic use (see 6.1, 6.7 and ...Subject(s) : Combat service , Compression-ignition , Power transmission fluid , Tactical service , Tribology , -
MIL-DTL-46162E
Abstract: This specification covers two types of referee fuel (see 1.2 and 6.1), for use in research, development and verification testing of all compression-ignition engines, diesel-powered auxiliary units, gas turbine ...Subject(s) : Compression ignition engines , DF-2 , Engine qualification testing , JP-8 , Special test fuel , Turbine engines , -
MIL-HDBK-682
Abstract: This handbook defines and amplifies policies and concepts used in technical data formulation and gaging techniques for the acceptance of tank-automotive materiel. The scope of this handbook is limited to inspection equipment ...Subject(s) : Acceptance criteria , Commercial standard test equipment , Datum surface , Dimensioning , Fit , Gage design , Inspection equipment designs , Interchangeability , MMC system of dimensioning , Product drawing , Quality assurance provision (QAP) , RFS gages , Standard measuring equipment , Tolerancing , Variables. , -
A-A-52509
Abstract: This CID covers the requirements for a light towing hook for use when towing vehicles weighing from 7.26 to 13.62 metric tonnes. The towing hook, herein referred to as "hook", interfaces with a towing lug which is attached ... -
MIL-PRF-14442E
Abstract: This specification covers one type of non-metallic, non-self-sealing fuel tanks (fuel cell type) for use in military tactical vehicles and combat vehicles. Intended Use: The nonmetallic, non-self-sealing ...Subject(s) : Carcass , Cell type , Diesel , Fluid container , Gasoline , -
MIL-PRF-62122E
Abstract: This specification covers cable assemblies, plugs, receptacles and adapters used for a temporary connection between electrical systems of two vehicles for the purpose of starting the main engine of a disabled vehicle from ...Subject(s) : Clamp , Jumper , Mating , Starting , -
A-A-59719 VALID NOTICE 1
Abstract: This commercial item description (CID) covers a two-component polyurethane lining used in protecting profiled, cleaned and primed (when required) wood, concrete, rigid plastic, fiberglass, elastomeric plastic and metal ...Subject(s) : Abrasion protection , Chip resistant , Corrosion protection , Corrosion resistance , Impact protection , Sound emission , Stone pecking , Vibration absorption ,