درباره ما
MSFC-SPEC-708 REV A
SPECIFICATION FOR IDENTIFICATION MARKERS FOR SPACE SYSTEMS ELECTRICAL HARNESSES
| contributor author | MSFC - NASA - MSFC - Marshall Space Flight Center | |
| date accessioned | 2017-09-04T16:30:36Z | |
| date available | 2017-09-04T16:30:36Z | |
| date copyright | 08/01/2007 | |
| date issued | 2007 | |
| identifier other | UMKSACAAAAAAAAAA.pdf | |
| identifier uri | http://mapnamagz.yabesh.ir/std/handle/yse/93995 | |
| description abstract | General – This specification covers the requirements for identification markers for use on space systems electrical cable harnesses. Applicability – The identification markers are intended for use on electrical cable harnesses utilized in space systems both inside crew compartments and exposed to the outside space environment over the temperature range of -55ºC to +200ºC. The identification markers may also be used at temperatures down to -173ºC if they are not subjected to flexing. Types – The identification markers shall be furnished in two types as defined below: Type I – Tie-on markers for use on .25-inch and larger diameter cables and cable harnesses. Type II – Heat shrinkable markers for use on .45-inch and smaller diameter cables and cable harnesses.Intended Use: Identification markers described herein are intended for use on space systems electrical cable harness assemblies both inside crew compartments and exposed to the outside space environment over the temperature range of -55ºC to +200ºC. The identification markers may also be used at temperature down to -173ºC provided they are not subjected to flexing at temperatures below -55ºC. | |
| language | English | |
| title | MSFC-SPEC-708 REV A | num |
| title | SPECIFICATION FOR IDENTIFICATION MARKERS FOR SPACE SYSTEMS ELECTRICAL HARNESSES | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | MSFC - NASA - MSFC - Marshall Space Flight Center:;2007 | |
| contenttype | fulltext |
